This segment deals with the use of equipment for diagnostics, surgery and endoscopy, therapy and physical medicine, intensive care medicine / anaesthesia / respiration, rescue / emergency medicine, hygiene / sterilisation / disinfection as well as of imaging, implants / prostheses, surgical techniques and equipment for hospitals, surgeries and care areas.
Product categories
Product categories in the segment Electromedicine and Medical Technology:
Modern microscopes used for biological imaging are expensive, are located in specialized laboratories and require highly qualified staff. To research novel, creative approaches to address urgent scientific issues – for example in the fight against infectious diseases such as Covid-19 – is thus primarily reserved for scientists at well-equipped research institutions in rich countries.
A material that mimics human skin in strength, stretchability and sensitivity could be used to collect biological data in real time. Electronic skin, or e-skin, may play an important role in next-generation prosthetics, personalized medicine, soft robotics and artificial intelligence.
A new method for analysing the structure of skin using a type of radiation known as T-rays could help improve the diagnosis and treatment of skin conditions such as eczema, psoriasis and skin cancer.
An exciting research project with current relevance and a wide range of possible applications is currently underway at Hof University of Applied Sciences: The Institute for Material Sciences (ifm) is doing research on antibacterial surface coatings. In the future, these paint compounds are going to be used in hospitals, doctors’ surgeries and will inhibit the spread of bacteria and viruses.
The world’s fastest whole-body PET/CT scanner is being put into service today at Bern University Hospital’s Inselspital Department of Nuclear Medicine. This scanner of the latest generation opens up new dimensions in research, diagnostics and therapy planning.
Robots so tiny that they can manoeuvre through our blood vessels and deliver medications to certain points in the body - researchers have been pursuing this goal for years. Now, scientists at ETH Zurich have succeeded for the first time in building such "micromachines" out of metal and plastic, in which these two materials are interlocked as closely as links in a chain.
Magnetic resonance imaging (MRI) is indispensable in medical diagnostics. However, MRI units are large and expensive to acquire and operate. With smaller and cost-efficient systems, MRI would be more flexible and more people could benefit from the technique.
A simple eye exam combined with powerful artificial intelligence (AI) machine learning technology could provide early detection of Parkinson's disease, according to research being presented at the annual meeting of the Radiological Society of North America (RSNA).
Researchers have developed a chip that is powered wirelessly and can be surgically implanted to read neural signals and stimulate the brain with both light and electrical current. The technology has been demonstrated successfully in rats and is designed for use as a research tool.
Professor of Biomedical Engineering Adam Feinberg and his team have created the first full-size 3D bioprinted human heart model using their Freeform Reversible Embedding of Suspended Hydrogels (FRESH) technique.
Experiments led by researchers at the Department of Energy's Oak Ridge National Laboratory have determined that several hepatitis C drugs can inhibit the SARS-CoV-2 main protease, a crucial protein enzyme that enables the novel coronavirus to reproduce.
More than 40% of middle-aged adults have silent coronary artery disease. Researchers have developed a new screening questionnaire to help identify individuals at the highest risk for coronary artery disease, according to late-breaking research presented today at the American Heart Association's Scientific Sessions 2020.
Even with decades of unprecedented development in computational power, the human brain still holds many advantages over modern computing technologies. Our brains are extremely efficient for many cognitive tasks and do not separate memory and computing, unlike standard computer chips.
Forget glue, screws, heat or other traditional bonding methods. A Cornell University-led collaboration has developed a 3D printing technique that creates cellular metallic materials by smashing together powder particles at supersonic speed.
Sensors that monitor a patient's condition during and after medical procedures can be expensive, uncomfortable and even dangerous. Now, an international team of researchers has designed a highly sensitive flexible gas sensor that can be implanted in the body -- and, after it's no longer needed, safely biodegrade into materials that are absorbed by the body.
In the quest to image exceedingly small structures and phenomenon with higher precision, scientists have been pushing the limits of optical microscope resolution, but these advances often come with increased complication and cost.
A hybrid implant coating made from antibacterial silver and an antibiotic will protect patients from infection in the future. The antibiotic is tailored to the patient’s unique requirements for even better protection. The AntiSelectInfekt project came about in collaboration with a research team from Charité-Universit?tsmedizin Berlin.
Upper limb forequarter amputations which involve the removal of the entire arm and scapula require highly customized prosthetic devices that are expensive but yet, usually underutilized due to their high maintenance and low comfort levels. At the same time, while cosmetic prostheses have a higher rate of continuous use, they have limitations in functional use.
A new portable arm rehabilitation robot will help patients to carry out robot-aided therapy at home, allowing them to perform intensive exercises without visiting hospitals or clinics, which can possibly reduce the risk of exposure to infectious diseases such as COVID-19. The robot can also be used in hospitals and outpatient facilities such as nursing homes and clinics.
Demonstrated the mechanism behind the secondary generation of cavitation clouds that mechanically fractionates surrounding tissue in focused ultrasound treatment. Laid the groundwork for precise removal of the target tissue.
The findings by imaging specialists at NYU Grossman School of Medicine center on small bright spots on scans called white matter hyperintensities. Increased numbers and size of the intense-white spots seen on the mostly gray images of the brain have long been linked to memory loss and emotional problems, especially as people age.
Scientists have engineered tissue grafts that, in pigs, regenerated both bone and cartilage in the temporomandibular joint (TMJ), a part of the jaw that can cause debilitating pain and disability when damaged.
A bioceramic implant has proved to stimulate regeneration of natural skull bone, so that even large cranial defects can be repaired in a way that has not been possible before. The research, led from the University of Gothenburg, is presented in the scientific journal PNAS.
When the Zucker Institute for Applied Neurosciences (ZIAN) at the Medical University of South Carolina needed to bring to life a neurosurgeon's idea for better instrumentation for sacroiliac surgery, there was one obvious partner to turn to: the MUSC College of Dental Medicine.
Scientists have made a breakthrough in their work to develop semi-autonomous colonoscopy, using a robot to guide a medical device into the body. The milestone brings closer the prospect of an intelligent robotic system being able to guide instruments to precise locations in the body to take biopsies or allow internal tissues to be examined.
DiaSys is proud to present its new water purification systems: O classic, O mini and O maxi. The accuracy and reliability of test results depend to a large extent on the quality of the process water.
Brandon Medical launches interactive virtual tour and live demonstration platforms of equipment package for operating rooms and critical care areas in order to support hospitals to return to elective...
rotation turning anti decubitus air mattress turning mattress turning medical mattress bedridden medical air mattress Here introduce our new design turning / alternating pressure system : HF808...
Oztas started its activities in 1980 and provides services in metal processing, achieved a rapid growth in the commercial cooler sector with its Greencooler brand in 2016. In 4 years, the company...
San Antonio-based Knight Aerospace just launched manufacture of state-of-the-art “flying emergency rooms” that safely transport and treat critically ill and highly contagious patients while in flight.
Combined with Portfolio of Medical CameraCubeChip? Modules and OVMed ISP Boards, New Line of Cables Enables OmniVision to Uniquely Provide Optimally Tuned End-to-End Imaging Subsystems OmniVision...
Joint Solution Combines OmniVisions Wafer-Level CameraCubeChip? Technology With Almalences Unique SuperResolution Algorithm to Provide Highest Quality Images of Smallest Parts of Anatomy...
Ersin ?zta?, the general manager of ?zta? Demir ?elik… When you listen to the story of the company, it becomes clear how fast the steps can be climbed with value added production. The company,...
Inc. Magazine revealed this week that Aspen Laser Systems has been selected for its Inc. 5000 list, the most prestigious ranking of the fastest-growing private companies in the United States.
With the increasing number of clinical applications and evolving spaces, MAVIG has expanded its previous generation of medium-load monitor mount systems into a versatile product that meets the...
T he MPG plasma coating technology creates a super-low energy gas plasma flow. This allows the injection of antimicrobials, and to instantly graft these molecules onto the surface, activated by...
By developing industry leading sustainable technologies, Johnson Matthey provides platinum group metals (PGM) in various forms such as wire, tube or sheet as well as high-quality precision machined...
Edmund Optics?, the premier provider of optical and imaging components, announced today that it has acquired Quality Thin Films, Inc. (QTF). QTF, located outside of Tampa, Florida, offers a wide range...
Optimal examination and operation conditions can only be achieved if a precise illumination of the wound area is guaranteed. The correct positioning of the lamp body is therefore essential. Whether in...
WEDGES: A prospective, multi-center randomized trial for the evaluation of coronary lesion preparation: an assessment of a new scoring balloon by quantitative stent enhanced visualization...
As you may know, Westlake Chemical Corporation completed the acquisition of NAKAN (IVY GROUP HOLDING) in January 2019. As a result, all NAKAN entities became Westlake companies. Today, we are pleased...
IRENE is delighted to announce that all hip joint products have received CE certificate, which means that IRENE hip joint products comply with relevant standards and regulations of EU, and have been...
Tri-Wedge PTA Scoring Balloon Dilatation Catheter (hereinafter referred to as Tri-Wedge), manufactured by Brosmed Medical Co., Ltd., is an “over-the wire” catheter with a unique feature that...
Healthcare systems are under strain throughout Europe. We are seeing an explosion in costs, a shortage of skilled workers and physicians while, at the same time, facing an ageing population. However,...
**Not available yet for distribution outside the USA** GOLETA, Calif. – Inogen is set to enter the non-invasive ventilator market with its planned acquisition of New Aera for $70.4 million in cash.
The World Health Organization (WHO) recommends steam-based treatment technologies to disinfect/sterilize highly infectious waste (*), like waste infected with 2019-nCoV coronavirus. The STERIFLASH?...
EIZO GmbH today announced the release of the new 57.5-inch 8-megapixel color monitor RadiForce LL580W for cost-effective Hybrid OR and interventional radiology usage. This 4K UHD (3840 x 2160 pixel)...
On September 8, 2020, under the guidance of the Organization Department of the Xiamen Municipal Party Committee, the Xiamen Torch High-tech Zone Management Committee, the Municipal High-level Talent...
In order to drive new product developments in the shortest possible time, RRC power solutions now offers an immediately available solution for the necessary portable power supply: the Power-Package...
Prof. Dr. Andreas Pinkwart, Minister for Economic Affairs, Innovation, Digitalisation and Energy of the State of North Rhine-Westphalia, appeared in 2019 as speaker on the topic MEF: Digitalisation of the Health Care Industry - Challenges and Opportunities, in the MEDICA ECON FORUM.